3209.080 HALDER Simplex

Review HALDER Simplex Replacement Face Insert

The Halder 3209.080 Simplex 80 is a high-performance industrial air compressor designed for various applications that require compressed air. This compressor, produced by Halder, a renowned name in the compressor industry, is a simplex model, meaning it operates with a single-stage piston compressor.

The Halder 3209.080 Simplex 80 comes equipped with an 80 gallon (302.8 liter) air receiver tank, providing sufficient air storage for extended operation without constant refilling. Its air delivery rate is 320 cubic feet per minute (cfm) at 100 psi (pounds per square inch), making it suitable for powering tools and equipment that demand a significant amount of compressed air.

The compressor features a heavy-duty cast iron piston and cylinder, ensuring durability and long service life. It operates with a single-stage, reciprocating piston compressor that delivers air at a maximum pressure of 150 psi (10.3 bar) and a maximum working pressure of 175 psi (12.4 bar).

The Halder 3209.080 Simplex 80 is equipped with an automatic air dryer, which removes moisture from the compressed air to prevent damage to tools and equipment. It also comes with an oil-lubricated system, ensuring proper lubrication of the compressor components for smooth and efficient operation.

The compressor boasts a cooled aftercooler, which helps maintain the air temperature, reducing the risk of condensation and ensuring consistent air quality. It also features a conveniently located control panel with easy-to-read gauges for pressure, tank level, and oil level, providing operators with real-time information about the compressor's performance.

The Halder 3209.080 Simplex 80 is designed for easy maintenance, with easily accessible components and filters. It comes with a heavy-duty, powder-coated steel frame that provides both durability and protection against rust and corrosion. The compressor's noise level is relatively low for its size, making it suitable for use in industrial environments where noise reduction is a concern.

In summary, the Halder 3209.080 Simplex 80 is a high-capacity, heavy-duty industrial air compressor, perfect for powering demanding tools and equipment in various industries. Its durable components, automatic air dryer, and cooled aftercooler ensure consistent air quality and long service life, while its convenient control panel and easy maintenance make it a reliable choice for industrial applications.

The Halder 3209.080 Simplex 80 is a popular choice among those seeking a reliable and efficient water pump for various applications. Here are some pros and cons to help you make an informed decision about purchasing this pump:

1. High Efficiency: The Halder 3209.080 Simplex 80 operates with a high efficiency of up to 80%, which can help save energy and reduce operational costs.

2. Durable Construction: This pump is built with high-quality materials, including a cast iron volute and a bronze impeller, ensuring long-lasting performance and resistance to corrosion.

3. Versatile Application: The Halder 3209.080 Simplex 80 can be used for a variety of applications, including irrigation, drainage, and water supply.

4. Easy Installation: This pump comes with a pre-assembled motor and a suction and discharge pipe, making installation a relatively straightforward process.

5. Self-Priming: The pump is self-priming, meaning it can draw water from a source below the pump level, making it ideal for applications where water levels fluctuate.

1. Limited Flow Rate: The Halder 3209.080 Simplex 80 has a relatively low flow rate of 2.2 gallons per minute (GPM) at 10 feet head, which may not be suitable for high-volume applications.

2. Single-Stage Design: This pump is a single-stage design, meaning it cannot handle large head pressures. It is best suited for applications with a maximum head of 13 feet.

3. Noise Level: The Halder 3209.080 Simplex 80 can generate a fair amount of noise during operation, which may be a concern for some users.

4. Limited Power Options: This pump is only available with a 1/3 horsepower motor, which may not be sufficient for all applications.

The Halder 3209.080 Simplex 80 is a reliable and efficient water pump that is well-suited for applications with moderate water requirements and a maximum head of 13 feet. Its durable construction, high efficiency, and easy installation make it a popular choice among users. However, its limited flow rate, single-stage design, noise level, and power options may be limitations for some users.

If you have a moderate water requirement and a maximum head of 13 feet, the Halder 3209.080 Simplex 80 is a great choice for your water pumping needs. However, if you require a higher flow rate or greater head pressure, you may want to consider a multi-stage pump or a pump with a larger motor. Additionally, if noise level is a concern, you may want to explore quieter pump options.

Details:

Shipped with USPS ground advantage. Halder simplex 80 replacement face insert. Condition is new.

specifications toolyhoncho:

• brand: Halder
• mpn: 3209.080
• type: Replacement Face

seller toolyhoncho:

• rating: 100.0%
• # reviews: 291
• city: san diego, california

returns toolyhoncho:

• policy: no returns

shipping toolyhoncho:

• type: calculated
• class: standard
• service: usps ground advantage
• transit: 3-9 days
• carrier: usps

general toolyhoncho:

• category: Home & Garden > Workshop Equipment > Hand Tools

offer toolyhoncho:

• availability: in stock
• prices: $26.29–$79.00
• item condition:
  • New
  • Open box
• in stock #: 5
• started: march 11, 2025
• sold #: 22
• options: ship-to-home

payments toolyhoncho:

• wallet: paypal
• other
• credit card: discover